Rythmik Audio F12-SE
₹182,627.00
12″ sealed audiophile sub
SPECIAL ORDER
This product can be arranged on request. Call us for pricing details to place your order
- Description
- Additional information
- Reviews (0)
Description
F12SE is F12 with gloss finish. All other components and amplifier options are same as regular F12. The standard amplifier is A370XLR3. (370WRMS with both RCA and XLR inputs). The quickguide of the A370XLR3 amplifier for sealed subs can be found here . A370XLR3 amps do not have high pass filter RCA outputs. But it does have dedicated LFE inputs allowing for easy integration of a 2-ch-plus-HT system setup. A370PEQ3 has both speaker level inputs and LFE/LINE RCA inputs for those with AV receivers. A370PEQ amplifiers are available for those who still need high pass filter (or HPF) RCA outputs. The response curves with various extension frequency/damping combinations of both amplifiers can be found in our EQ page. Manual for each amplifier choice is available below in documentation section.
Black cones are made of anodized aluminum. Silver cone driver is available for $50 extra. Price includes shipping to 48 US continental states only. Shipping to other region or country should inquire us for actual cost.
The F12SE sub comes with screw-in rubber feet. Spike feet are available as add-on for $25 with no exta shipping cost. The standard amplifier is A370XLR3.
Our speaker level inputs are only compatible with power amplifiers having single ended outputs with black lead output labelled as “COM”, “GND”, or “Ground”. Wyre4sound power amplifiers and others with differential outputs are not compatible. These amps need an XLR type 3-wire (one positive, one negative, and one ground) for safe operation.
Using Y-splitter on input connection increases the subwoofer gain by 6db. High efficiency horn speakers (105db/Wm and above) may require custom modification for “gain matching” of the volume control knob (not to be mistaken as sub not keeping up with horn speakers) when this connection method is not option (eg, single sub acception both L and R inputs).To summarize, customers who need to consider higher gain are those with all these conditions: 1) has high efficiency horn speakers, 2) has no AVR or pre-processor, and 3) cannot use Y-splitter to connect to multiple inputs on a sub to increase gain by 6db. Please select “High gain” option in the order.
Efficiency of newer Klipsch horn speakers are over-rated by 6db and not an issue for gain matching. Please inquiry us when using our subs with horn speakers if you are not sure what to do.
Direct Servo Technology
You may have heard about other servo subwoofers which are generally well regarded for their accuracy. It is a well established technology, most often based around an accelerometer which measures cone movement. Our Direct Servo technology has significant advantages over other servo technologies. We use a sensing servo coil which acts like a microphone which compares the original signal to what the subwoofer is actually reproducing. The signal is then corrected instantly to compensate for any differences. Once you understand the concept, you may wonder like we do why anyone would make a subwoofer any other way.
All our subwoofers use our patented Direct Servo technology. The most significant benefit is that it provides high end performance at an affordable price. Conventional subwoofers require heavy drivers in order to achieve deep bass extension. Direct Servo allows the use of a lighter driver which is more efficient so that a very high powered amplifier is not necessary. At the same time, Direct Servo reduces detrimental memory effects which detracts from the realism of reproduction. Unlike many other non-servo subs which exhibit two-mode bass: either with too much bass when volume is up or with too little or no bass when the volume is down, our higher resolution subwoofers allow customers to listen at lower level and yet able to hear details in the bass in a wide range of volume level. In other words, the bass is simply more natural instead of constantly drawing our attention that we have a subwoofer in the system.
Some of the benefits of Direct Servo include:
- Reduction of the effects of thermal compression are eliminated under normal operation
- Higher efficiency allowing output which would normally require a more powerful amplifier
- Deep bass extension can be achieved using a low mass driver with superior transient response
- Mechanical and thermal memory effects are reduced, further improving transient response
- The effective in-box Q value is 0.3 with enclosure (0.13 for driver itself), resulting in much tighter and accurate bass than conventional designs with typical in-box Q value of 0.8-0.9
- Dramatic reduction of the re-radiation of bass from inside the box
Many audiophiles aren’t aware of all of these issues, but we believe they are critical to the design of an accurate subwoofer. While it’s not necessary to understand them to enjoy accurate bass, for those who wish to understand how we do it, we have articles to describe our unique approach.
Specifications
Driver | 12″ high excursion with custom sensing coil |
Driver materials | Black or silver anodized aluminum with rubber surround |
Cast aluminum basket | |
Aluminum flux de-modulation shorting rings | |
Amplifier | 370w RMS class A/B patented servo controlled |
Dimensions | 15-3/4″(W) x 15-3/4″ (H )x 17″(D) – (18-1/2″ D with grille) |
Shipping Weight | 76 lbs |
Frequency Response | 14 – 200 Hz (-2 dB @ 14 Hz) with LFE inputs in A370PEQ3/XLR2/XLR3 |
14 – 100 Hz (-2 dB @ 14 Hz) with LINE IN inputs in all models | |
Crossover slope | Selectable 12 or 24 dB / octave (PEQ and XLR versions) |
Crossover range (Low pass) | 25 – 100 Hz |
Rumble Filter (High pass ) | 20hz 18 dB / octave |
Phase response | < 90 degrees phase shift at 20 Hz |
Phase adjustment | 0 – 180 degrees continuously variable |
Bass damping factor settings | high (Q=0.5), med (Q=0.7), and low (Q=1.1) |
Finishes | Piano Gloss |
Warranty | 5 years warranty on driver and 3 years on electronics |
45 day satisfaction guarantee |
Additional information
Weight | 34.5 kg |
---|
Reviews
There are no reviews yet.