Harmony DSP 8×12
₹110,932.20
Dirac Live powered 12ch Car Amplifier, 32bit floating point SHARC ADSP21489 @ 400MHz, 8×12 I/O, USB/SPDIF/A2B, OLED Remote for Preset/Master & Sub volume control
- Description
- Reviews (0)
Description
miniDSP is proud to introduce the latest addition to its line of innovative car audio processors. The all-digital Harmony DSP 8×12 integrated DSP/amplifier features six-channels digital audio input via USB, stereo digital optical input (TOSLINK), Dirac Live® acoustic correction and 12 output channels.
Hardware features dedicated to the vehicle environment include an on-board isolated power supply, remote trigger input/output, and a wired remote with OLED display for dash or console. Flexible output configurations cater to a wide variety of system configurations: each output can be a 40 Wrms power amplifier or a line-level output for driving external amplifiers. In addition, each pair of outputs can be configured in parallel BTL mode for 80 W output into 2 Ω loads.
In addition to Dirac Live, the Harmony DSP 8×12 includes miniDSP’s powerful, easy-to-use audio processing: parametric EQ, compressors, adjustable time delay, crossovers up to 48 dB/octave, and an advanced matrix mixer with rear/center capability. Four complete processing configurations are stored in flash memory for recall with a wired or infrared remote.
Features
- 400MHz 32bit Sharc Floating point processor
- Dirac Live technology helps tune your cabin environment
- All Digital amplifier
- USB Audio (6ch), Toslink(2ch), A2B (future) digital inputs
- 12 channel flexible amplifier for Mono/Bridged mode and Line OUT(driving external amps)
- Flexible DSP processing blocks, Rear Fill processing (L-R, L+R..) thanks to internal matrix
- Windows/Mac compatible GUI
- Remote control or preset/master & sub volume control
| Item | Description |
| Digital Signal Processor | 400 MHz, 32-bit floating-point SHARC Digital Signal Processor (ADSP21489) Internal sample rate: 48 kHz. |
| Control | Driverless USB 2.0 control interface for control from Windows or Mac |
| Digital audio inputs | USB Audio, up to 6 channels at 44.1 or 48 kHz TOSLINK stereo audio, 44.1 to 192 kHz A2B® multichannel Audio (future option via firmware upgrade) |
| Digital audio outputs | A2B® multichannel for linking amplifiers (future option via firmware upgrade) |
| Power output | 12 x 40 W RMS (4 Ω load, BTL mode) 6 x 80 W RMS (2 Ω load, PBTL mode) THD+N < 0.03 % (f = 1 kHz, 30 mW to 40 W, 4 Ω load, BTL mode) SNR >107 dB (f = 1 kHz, A-weighted, 40 W into 4 Ω) Frequency response: 20 Hz – 20 kHz ± 0.5 dB CrossTalk: < –80 dB (1 kHz) |
| Analog output mode | Selectable analog output mode from plug-in:
|
| Line Out mode specs | Max output level: 5 V RMS balanced (in line out mode) THD+N < 0.03 % (f = 1 kHz, digital input 0 dB) SNR >102 dB (f = 1 kHz, A-weighted) Frequency response: 20 Hz – 20 kHz ± 0.2 dB |
| DSP processing | Dirac Live correction (8 ch), matrix mixer, miniDSP processing on all 12 outputs |
| Configuration presets | Four onboard presets for Dirac Live and miniDSP processing stored onboard |
| Wired external remote | External wired remote (RJ11 cable for power and data) selects active preset, master volume and master mute, Dirac Live on/off; OLED status display. |
| Power supply / REM in&out | 10 –16 V DC compliant REM in (4 V DC trigger level) |
| Dimensions (W x D x H) | 321 x 150 x 45 mm (main unit), 102 x 23 x 41 (wired remote) |
| Enclosure | Powder-coated steel with aluminium heatsink |
Reviews
There are no reviews yet.